Accumulator
Bottle w/Swagelok Fittings (includes cradle)
RT-3SSSW/GAUGE $500
Accumulator Bottle w/QRS Fittings (includes cradle)
RT-3QRSW/GAUGE $300
Cradle Assembly w/strap (bottle not included)
Cradle $60

Add
the E-REEL™ upgrade package to your Boat Hookah System today
to create the ultimate diving system! Components can be installed
wherever space permits and remain hidden from view when not in use,
keeping your deck clean and functional. For ease of use, one simple
switch mounted in a convenient location controls both the air compressor
and the reel.
Is there really enough hose to see everything and have fun while diving
with this system? The answer may surprise you. The E-REEL™ gives
divers the freedom to explore an area almost 40% larger than an American
football field!
Using the Boat Hookah System with the E-REEL™ upgrade is the
easiest way to dive as it requires almost no heavy equipment, can
be easily deployed in moments and automatically recoils with the flip
of a switch! The E-REEL™ package is the most convenient diving
system available for your boat.
12V Package includes:
(1) Level-wind reel with 150 ft hose,
(1) Through-hull (Hawse) fitting with integrated 3-way switch and
wiring harness.
E-REEL 12V $2400
115V
Package includes:
(1) Level-wind reel with 150 ft hose, integrated battery w/charger
(1) Through-hull (Hawse) fitting with integrated 3-way switch and
wiring harness.
E-REEL 115V $2700
Accumulator
Bottle w/Swagelok Fittings $500
Accumulator Bottle w/QRS Fittings $300




*
WARNING: Improper use of any underwater diving equipment
can result in serious injury or death. DO NOT dive without proper
training.
Installation
from a Novurania 530

| Battery
powered systems can be built into almost any size boat
for the convenience of hookah wherever you go! This inflatable
yacht tender has a complete 12vdc hookah system installed in
the console. Just connect the hoses and flip the switch for
effortless diving. For recreational and commerical applications.
See your boat builder or contact Brownie's™ for assistance
with system requirement and installation ideas. |
|
 |
This fitting
is located on starboard side of console. A QRS fitting with a
machined delrin stopper is designed to hold the hose in place
just inside the fitting so the cap can close flat yet the hose
is still easy accessible just inside the fitting. |
| The male
QRS fitting is disconnected from the female end of the heat hose.
There is a lanyard to prevent the stopper fitting from being lost
or misplaced. |
 |
 |
The female heat hose
fitting is then connected to the divers' down line and then to
the diver hoses and regulators. |
 |
On the
console is a machined delrin fitting for the intake staff. When
the unit is in use the dust cap is removed and the intake staff
is inserted into the socket. The dust cap is kept on a lanyard
so as soon as the staff is removed the cap can be replaced onto
the socket. This prevents intrusion of any water or foreign materials.
|

|
| |
- The intake staff
is 54 inches tall so flag is in an area of greater visibility
& ensures compressor a fresh supply of air.
- The staff is made
of two separate pieces that disconnect to allow storage into
a smaller space.
- The drip cap
is machined out of a solid piece of delrin and completely
keeps oversprayed water out of the compressor head.
- Brownie's Third
Lung™ follows all of the legal specifications for "divers-down
flags" as required by the Florida Fish & Wildlife
Conservation Commission Law Enforcement.
- There is a machined
piece of starboard that attaches from the console rail to
the staff which helps avoid any risk of movement or detachment
should the boat pitch and roll.
|
 |
 |
System
comes complete with two full Brownie's™ hookah diver set-ups
and stows conveniently into the box just forward of the console.
|
Please contact your boat
builder or Brownie's Third Lung™ for assistance with system
requirements and to discuss installation options.
Click
here to download the Built-In System Flyer (1M)
Download
Adobe® Reader®.