Brownie's Third Lung Accessories

Accessories & Extras

Drop Weight Cummerbelt™
A Brownie's Exclusive
More than just a tow belt. More than just a weight belt. The Drop Weight Cummerbelt™ (patented) is included in these hookah diving systems and can change the way you dive. It's instantly adjustable for waist sizes from 24 to 54 inches, so it can fit everyone in the family. It is fully padded, depth compensating and contoured to fit your waist so you won't get the "gravity twist" like common weight belts.

It has 2 pockets - each capable of holding up to 10 lbs. of lead block or shot pouches. For added safety and control, each pocket can be instantly released by either hand (even if gloved) while still retaining the belt. You can easily achieve positive buoyancy by releasing a single pouch - much safer than dropping all your weight at once. And you always stay connected to the air hose and the surface.

DWC-4-BL $99

Drop Weight Cummerbelt
- Replacement Pockets (pair)*

Lose a pocket? Instead of calling the dive, keep spare pockets onboard and you'll be back in the water in no time!

find out more...

Bring another friend!

Add-A-Diver Kit
Includes everything you need to snap another person into either system.
(1) QRS Y-Divider
(1) 20 ft diver hose with QRS fitting
(1) Brownie’s™ hookah regulator
(1) Brownie’s™ patented Drop Weight Cummerbelt™
ADKX-20 $340

Egressor™ Scuba System
All divers are taught to carry a secondary air source in case of an emergency and hookah diving is no different. We recommend that all divers carry enough air to make a safe ascent at any time.

Our patented Egressor™ systems ride along in a handy sleeve in the small of your back-out of the way, yet always convenient. Not some tiny bottle that only provides a false sense of security, our systems feature a scuba pony bottle with a standard scuba valve (6 cu. ft. for the average diver or a full 13 cu. ft. for the serious explorer), our Egressor™ scuba regulator with a low-profile HP port gauge and the retension sleeve for the back of the Drop Weight Cummerbelt™.

More than just a safety device, you'll find all kinds of uses for your Egressor™ system. Light and small, it can be donned in seconds - much less time and effort than donning a full set of scuba. Perfect for quick response to items dropped over-board, verifying anchor location, hull inspection, prop clearing, pool maintenance, and much more!

DWC-EGS6-WS $525
DWC-EGS13-WS $525

find out more...

If the boat can't see you...

Hit 'em with a FOUR by FOUR™!

Small enough to carry while boating, swimming or diving
Can be carried in a pocket or clipped to your Brownie’s Cummerbelt, BCD or belt loop.
Inflated, measures an 4 feet long by 4 inches wide - increase your vertical reach by over 200%
Insert a chemical light stick or small flashlight in the integrated sleeve
Over 10 pounds of emergency lift capacity

4x4-INFL $34

find out more...

Inline Pressure Gauge - with QRS
Easily verify the pressure output from any Brownie’s compressor.

QRS-PG $70

Power Inflator Kit
Just not ready to give up your buoyancy compensator? The Y-Divider snaps right into your regulator hose, so it can provide air to both your BC and your regulator!

PIK $ 70

Brownie's Dogsnare™
The world’s best tool for catching da bugs. One end is a tickle stick, sure to prod the buggers out of their holes. The other is a stainless wire hoop that closes instantly around their (hopefully) big tails, and only opens when you want. 3 ft. reach and easy one-handed operation. It can be clipped onto a belt or BC. (We call ‘em dogsnares, go figure...)

DS-101 $ 38

Neptune II NIRA Full Face Mask by Ocean REEF
Not just for commercial diving applications! Our Neptune II mask with integrated NIRA regulator is tuned specifically for hookah applications. The regulator can be fine tuned to the most optimum breathing. Air flows through the mask to keep the lens clear. Highest quality silicone skirt ensures a perfect seal and constant comfort.

Your entire face stays clean, warm and dry. Communications kits are available for divers to speak to each other or to a surface support crew.
33360 $795

Egressor Second Stage
For use on a high pressure scuba cylinder, whether on Brownie's Egressor System or used with your Kayak Diving Hose Kit. (hoses purchased separately).
RG4X $115

Hookah Second Stage Regulator
For use on Brownie's Third Lung low pressure hookah diving units.(hose purchased separately).
RG-8 $129

Hookah Second Stage Regulator with Hose
Low pressure second stage for hookah diving. 40" hose with QRS fittings (no belt).
SR3107HKB2QRS5 $153

Maintenance and Repair Parts

QRS Connectors
(Quick Release Swivel™)
Another Brownie’s™ exclusive! Our proprietary design cuts hose assembly time by over 95%. Connect or disconnect hoses in a snap. Allows you to customize your hose configuration in seconds. An audible “click” confirms the connection is secure. To prevent accidental separation, two hands are needed to disengage the connection. The swiveling design reduces kinks and tangles while you dive.

QRS38M $ 8 Male QRS
QRS38F $ 8 Female QRS
QRSYA $ 34 Y Hose Divider

The Care Kit
Protection, Prevention and Remedy Keep your gear looking and acting new with Brownie’s Care Kit. It contains superior maintenance products and spare parts to save your vacation. Each kit includes: 2 spare male and 2 female QRS fittings, spark plug, Corrosion X engine protectant, Stabil fuel treatment, compressor head rebuild kit with instructions, spare mouthpieces, a handy air-gun attachment, and more... All in a neat, sectioned , roll-up carrying case for neat and convenient storage.

CK-280
CK-280R
CK-390
CK-390R $150
$150
$210
$210 For F280 Honda
For F280 Robin Subaru
For F390 Honda
For F390 Robin Subaru

* Rebuild kits include new style flapper valves. Please read Technical Bulletin to determine if you need new Valve Plate Assemblies to match.

BTL-DDRB1

Compressor Head Rebuild Kit
General maintenance rebuild kit for direct drive compressors includes: piston sleeve, cup, screw, o-ring, gasket, four flapper valves, and two screws. Kit also includes complete rebuild kit instructions.

Note: One rebuild kit is needed for each compressor head.

BTL-DDRB1 $80

BTL-DDRB2

Compressor Rebuild Kit -
with Valve Plates
Systems with serial numbers before 10239 require this kit to bring system up to current configuration. Kit includes: valve plate, gasket, o-ring, two valve restraints, four flapper valves, two screws, piston sleeve, cup, and screw. Kit also includes complete rebuild kit instructions.

Note: One rebuild kit is needed for each compressor head.

BTL-DDRB2 $120

* Read Technical Bulletin to determine which rebuild kit is necessary for your system.

Stabil®
Gas Guard and fuel treatment, 4 oz.

STABIL-04 $10

Corrosion X®
Protects engine from rust and corrision, 6 oz.

CX-6A $18

Over Pressure Relief Valve
Vents excess compressed air from system

PR25-008 $15